德国aircom详细说明
描述:
The pilot pressure regulator/booster regulates the outlet
pressure through a signal pressure at ratio of 1 to 1.
Functioning as a pressure regulator the pilot pressure may
either be internally inducted from the inlet pressure or
externally. The dome chamber is closed by a needle valve.
Functioning as a volume booster the dome is controlled by
a proportional pressure regulator or a pilot pressure regulator.
Media: compressed air, non-corrosive gases or liquids
Supply_pressure:
max. 25 bar for RL.-0.J1,
max. 100 bar for RL.-0.J2,
max. 40 bar for oxygen,
max. 1.5 bar for acetylene
Pilot_pressure:
max. 24 bar for RL.-0.J1,
max. 99 bar for RL.-0.J2
Pilot_port: G1/4
Accuracy:
at supply pressure variation of 10 bar = 0.1 bar pressure deviation
at temperature variation of 3 °C / K = 1% pressure deviation at internal pilot pressure
Air_consumption: without constant bleed
Relieving_function: non-relieving
Gauge_port: not available
Mounting_position: any, dome preferably mounted up
Temperature_range:
-20 °C to 100 °C / -4 °F to 212 °F for FKM,
-40 °C to 130 °C / -4 °F to 266 °F for EPDM
Body: brass or stainless steel
Inner_valve: brass or stainless steel
Elastomer: FKM, optionally EPDM
德国aircom型号大全
R280-08EG G1`` 0.5-25bar流量计
AIRCOM R280
特价供应 AirCom 调压阀 R201-12I
MHA-A5压力表
D4V-C3压力变送器
AirCom R160-04B03
FM-03_02过滤器
P824-50流量调节器
AIRCOM R308
D8V-35压力调节器
特价供应 AirCom 调压阀 R280-06E G1 0.5...25 Bar
AirCom MHA-A5P
B11-02WJC空气过滤减压阀
AirCom 压力表 MHA-A5P
AIRCOM R364-S
B20-08WJC过滤器
AirCom 流量计 PVM25-45
压差 Differential Pressure
AirCom R160-04B15
AirCom 风压仪 MHA-A2P
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
描述:
The pilot pressure regulator/booster regulates the outlet
pressure through a signal pressure at ratio of 1 to 1.
Functioning as a pressure regulator the pilot pressure may
either be internally inducted from the inlet pressure or
externally. The dome chamber is closed by a needle valve.
Functioning as a volume booster the dome is controlled by
a proportional pressure regulator or a pilot pressure regulator.
Media: compressed air, non-corrosive gases or liquids
Supply_pressure:
max. 25 bar for RL.-0.J1,
max. 100 bar for RL.-0.J2,
max. 40 bar for oxygen,
max. 1.5 bar for acetylene
Pilot_pressure:
max. 24 bar for RL.-0.J1,
max. 99 bar for RL.-0.J2
Pilot_port: G1/4
Accuracy:
at supply pressure variation of 10 bar = 0.1 bar pressure deviation
at temperature variation of 3 °C / K = 1% pressure deviation at internal pilot pressure
Air_consumption: without constant bleed
Relieving_function: non-relieving
Gauge_port: not available
Mounting_position: any, dome preferably mounted up
Temperature_range:
-20 °C to 100 °C / -4 °F to 212 °F for FKM,
-40 °C to 130 °C / -4 °F to 266 °F for EPDM
Body: brass or stainless steel
Inner_valve: brass or stainless steel
Elastomer: FKM, optionally EPDM
德国aircom型号大全
R280-08EG G1`` 0.5-25bar流量计
AIRCOM R280
特价供应 AirCom 调压阀 R201-12I
MHA-A5压力表
D4V-C3压力变送器
AirCom R160-04B03
FM-03_02过滤器
P824-50流量调节器
AIRCOM R308
D8V-35压力调节器
特价供应 AirCom 调压阀 R280-06E G1 0.5...25 Bar
AirCom MHA-A5P
B11-02WJC空气过滤减压阀
AirCom 压力表 MHA-A5P
AIRCOM R364-S
B20-08WJC过滤器
AirCom 流量计 PVM25-45
压差 Differential Pressure
AirCom R160-04B15
AirCom 风压仪 MHA-A2P
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
QQ：1325426082广告业务:
